Filter
Top Products
52
Settings (Edit mode)
You can assign a controller to adjust the speed of the F8 clock (20–250).
* In order to transmit F8 clock, the F8 clock setting must be “ON.” (->
F8 Clock On/Off
(p. 70))
fig.H-Edit.eps
1
Press the [EDIT] button so it’s lit.
fig.D-Edit.eps
The display will indicate “EDIT.”
fig.D-r1.eps
2
Slightly move the controller to which you want to assign Tempo.
If the controller is a button, press it.
The display will indicate the number of the controller you selected.
3
Check the indication in the display, then press the [ENTER] button.
fig.D-Tempo.eps
4
Turn the VALUE knob to make “TMP” appear.
5
Press the [ENTER] button.
6
Set the button mode (p. 64) as appropriate for the type of controller.
* For a button, the On position specifies the maximum value (250) and the Off position specifies
the minimum value (20).
Tempo assign
PCR-300_500_800_e.book 52 ページ ２００６年１２月１９日 火曜日 午後２時５９分