Filter
Top Products
77
System settings
The PCR-300/500/800 has a MIDI MERGE switch. The MIDI Merge Destination setting specifies the port that will be merged when the MIDI MERGE switch is ON.
The MIDI Merge function is convenient when you’ve connected an external MIDI controller other than the PCR to the PCR’s MIDI IN connector. For example, you could connect another PCR,
and use one PCR to control your software synthesizer while using the other PCR to control your DAW software.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY09,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1]–[A3] to specify the desired MIDI merge
destination.
The display will show the setting you specified.
5
Press the [ENTER] button to return to Play mode.
MIDI Merge Destination
Controller
Indication Setting Summary
[A1 (0)]
PORT 1
Messages from MIDI IN will be
merged with the PCR’s PORT 1.
[A2 (1)] PORT 2
Messages from MIDI IN will be
merged with the PCR’s PORT 2.
[A3 (2)] MIDI OUT
Messages from MIDI IN will be
merged with the PCR’s MIDI OUT.
The MIDI MERGE switch and the MIDI Merge Destination
In this diagram, the MIDI MERGE switch is ON, and the MIDI Merge Destination is set to PORT 2, so the messages received at MIDI IN will be merged with the messages of PORT 2
and sent to the computer.
* If you turn the MIDI MERGE switch ON, no messages will be received if you’ve selected EDIROL PCR MIDI IN as the MIDI IN device on your computer.
EDIROL PCR 2
EDIROL PCR 1
EDIROL PCR MIDI IN
EDIROL PCR
X
EDIROL PCR MIDI OUT
MIDI OUT
MIDI IN
ON
PORT 2
PORT 2
ON
OFF
PORT 1
MIDI OUT
MIDI MERGE switch
MIDI MERGE DESTINATION
MIDI I/F MODE ON
MIDI OUT device
MIDI IN device
Bulk reception
PORT 1
PORT 2 /
Bulk transmission
USB
MIDI messages
PCR-300_500_800_e.book 77 ページ ２００６年１２月１９日 火曜日 午後２時５９分