Filter
Top Products
80
System settings
Here’s how to specify the function that will be controlled by the VALUE knob when you press the [USER] button.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY14,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1]–[A5] to choose the parameter that the
VALUE knob will transmit.
5
Press the [ENTER] button.
VALUE knob settings
VALUE encoder
Controller
Indication Setting Summary Value range
[A1 (0)]
KEY VELOCITY
The VALUE knob will specify the fixed velocity value. The PCR detects the force with which you
play the keyboard, and transmits this as the velocity, but if you use this function, the velocity will
be transmitted as the fixed value specified by the VALUE knob regardless of how strongly you
play the keyboard. Use this in cases where you want to eliminate dynamics from your playing.
tch, 1–127
* If you specify “tch,” velocity values
corresponding to your keyboard playing
strength will be transmitted.
[A2 (1)]
BANK LSB
The VALUE knob will specify the bank select LSB (CC#32).
0–127
[A3 (2)]
BANK MSB
The VALUE knob will specify the bank select MSB (CC#00).
0–127
[A4 (3)]
CONTROL
CHANGE
The VALUE knob will specify a control change.
0–127
[A5 (4)]
TEMPO
The VALUE knob will specify the tempo of the F8 clock.
20–250
As an alternate to the procedure described above, you can make this setting using the procedure below.
1. Press the [EDIT] button so it’s lit. The display will indicate “EDIT.”
2. Press the [USER] button. It will light, and the display will indicate the currently assigned parameter.
3. Use the VALUE knob to select the parameter you want to transmit.
4. Press the [ENTER] button.
This completes the setting.
PCR-300_500_800_e.book 80 ページ ２００６年１２月１９日 火曜日 午後２時５９分