Filter
Top Products
89
Connecting the PCR directly to a sound module
You can connect the PCR connected directly to a MIDI sound module, and use it to play and control the sound module.
If you’re not connecting the PCR to your computer via USB, you’ll need to use a separately available AC adaptor (p. 92). You can purchase the appropriate AC adaptor from your dealer.
fig.MIDI-External-e.eps
1
Use a MIDI cable to connect the PCR’s MIDI OUT connector to the MIDI IN connector of your MIDI sound module.
2
Connect the AC adaptor to the PCR’s DC IN jack.
3
Set the PCR’s power switch to “DC” to turn on the power.
Also, switch on the power to your MIDI sound module.
4
Set the PCR’s current channel to match the MIDI receive channel of your MIDI sound module.
5
When you play the keyboard, your MIDI sound module will produce sound.
Make sure that the power is turned off when
connecting your equipment.
MIDI sound module (available separately)
MIDI IN
DC IN
MIDI OUT
AC adaptor
(available separately)
PCR-300_500_800_e.book 89 ページ ２００６年１２月１９日 火曜日 午後２時５９分