Filter
Top Products
78
System settings
Here’s how to switch ADVANCED DRIVER ON/OFF.
Normally, we recommend that you use
ON
.
* Changes you make to this setting will take effect the next time you turn on the power.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY10,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1] or [A2] to specify the desired USB MIDI
driver type.
* FPT = Fast Processing Technology of MIDI Transmission
This makes effective use of the USB bandwidth depending on the amount of MIDI data being
sent, ensuring that MIDI data handling will always occur optimally.
5
Press the [ENTER] button to return to Play mode.
Advanced Driver Switch
Controller
Indication Setting Summary
[A1 (0)]
OFF
Choose this setting if you want to
use the standard MIDI driver provid-
ed by your operating system.
[A2 (1)]
ON
Choose this setting if you want to
use FPT technology to allow high-
speed MIDI transmission. We rec-
ommend that you normally use this
setting.
PCR-300_500_800_e.book 78 ページ ２００６年１２月１９日 火曜日 午後２時５９分