Filter
Top Products
71
System settings
Here’s how to specify the port from which F8 Clock will be sent when “F8 Clock On/
Off” is On.
1
Press the [EDIT] button so it’s lit.
The display will indicate “EDIT.”
2
Use the VALUE knob to select “SYS,” and press the [ENTER] button.
3
Use the VALUE knob to select “SY02,” and press the [ENTER] button.
4
Use the VALUE knob or controllers [A1]–[A3] to specify the F8 Clock Port.
The display will indicate the port you specify.
5
Press the [ENTER] button to return to Play mode.
F8 Clock Port Set
Controller
Indication Setting Summary
[A1 (0)]
PORT 1
The clock will be sent to “EDIROL
PCR 1.”
[A2 (1)] PORT 2
The clock will be sent to “EDIROL
PCR 2.”
[A3 (2)] PORT 1+2
The clock will be sent to “EDIROL
PCR 1” and “EDIROL PCR 2.”
PCR-300_500_800_e.book 71 ページ ２００６年１２月１９日 火曜日 午後２時５９分