Roland V-Synth GT Electronic Keyboard User Manual


 
102
Editing a Tone (Pro Edit)
Com MOD COSM1/2 TVA EffectsOSC1/2 AP Syn
fig.06b-24-ps.eps_50
In this screen you can make settings for the envelope that affects the pitch. For details on envelope settings, refer to
“Making Envelope Settings”
(p. 121).
Pitch (common to Analog and PCM)
Parameter
Value Description
Pitch (Oscillator Pitch)
-63– +63
Adjusts the pitch of the oscillator.
Pitch Keyfollow
(Oscillator Pitch Keyfollow)
-200– +200
This specifies the amount of pitch change that will occur when you play a key
one octave higher (i.e., 12 keys upward on the keyboard).
If you want the pitch to rise one octave as on a conventional keyboard, set
this to “+100.” If you want the pitch to rise two octaves, set this to “+200.”
Conversely, set this to a negative value if you want the pitch to fall. With a
setting of “0,” all keys will produce the same pitch.
Coarse Tune
(Oscillator Coarse Tune)
-48– +48
Adjusts the pitch of the oscillator up or down in semitone steps (+/-4 octaves).
Fine Tune (Oscillator Fine Tune)
-50– +50
Adjusts the pitch of the oscillator up or down in 1-cent steps (+/-50 cents).
One cent is 1/100th of a semitone.
Random
(Oscillator Random Pitch Depth)
0, 1, 2, 3, 4,
5, 6, 7, 8, 9,
10, 20, 30,
40, 50, 60,
70, 80, 90,
100, 200,
300, 400,
500, 600,
700, 800,
900, 1000,
1100, 1200
This specifies the width of random pitch deviation that will occur each time a
key is pressed. If you do not want the pitch to change randomly, set this to
“0.” These values are in units of cents (1/100th of a semitone).
Pitch LFO Depth
(Oscillator Pitch LFO Depth)
-63– +63
Specifies how deeply the LFO will affect pitch.
C4C3C2C1 C5 C6 C7
0
+50
+100
+200
-50
-100-200
Key
Pitch
V-Synth-GT_e.book 102 ページ 2007年4月9日 月曜日 午後1時46分