Filter
Top Products
25
Panel Descriptions
MIC IN Jack
This is a mic jack for analog audio signal input.
It accommodates either XLR type or phone type plugs.
XLR type connections can provide 48 V phantom power,
allowing you to connect condenser mics that require
phantom power. In this case, turn the PHANTOM switch to
“ON.”
* This instrument is equipped with balanced (XLR/TRS) type jack.
Wiring diagrams for this jack are shown below. Make connections
after first checking the wiring diagrams of other equipment you
intend to connect.
fig.XLR/TRSJack.eps
INPUT Jacks
* When connection cables with resistors are used, the volume level of
equipment connected to the INPUT jacks may be low. If this
happens, use connection cables that do not contain resistors.
DIRECT OUT Jacks
MAIN OUT Jacks
PHONES Jack
This is the jack for connecting headphones (sold
separately).
L
An external audio source such as a CD
player can be connected to these jacks
for sampling or external input.
R
L
These jacks output the sound for which
the effect routing (p. 139) output assign-
ment is “DIR.” You can connect to these
jacks when using an external effects pro-
cessor or other device.
R
L/MONO
These jacks output the audio signal to the
connected mixer/amplifier system in ste-
reo. For mono output, use the L jack (p.
17).
These also feature balanced output.
R
8
9
10
11
12
V-Synth-GT_e.book 25 ページ ２００７年４月９日 月曜日 午後１時４６分