Filter
Top Products
181
Sample Mode
(Zero Cross Search)
This function searches for locations where the sample has a value of zero. When setting loop points or when cutting
the sample, you should search for locations where the sample value is zero so that noise is not heard when you play
the sample.
Move the cursor to the point (“Start,” “End,” or “Current”) for which you want to find a zero-cross point, and then touch
or .
Touching will search toward the left, and touching will search toward the right.
(Zoom)
This expands or shrinks the displayed sample.
In any screen that displays the sample, you can touch the following buttons to expand or shrink the displayed sample.
: Shrink vertically
: Expand vertically
: Shrink horizontally
: Expand horizontally
fig.04-12.e
The vertical zoom bar indicates the magnification of the sample in the vertical direction. The horizontal zoom bar
indicates the magnification of the sample in the horizontal direction, and shows the current location. As the display is
magnified, the zoom bar will become narrower.
Zoom bar
Zoom bar
Actual length of wave
V-Synth-GT_e.book 181 ページ ２００７年４月９日 月曜日 午後１時４６分