Filter
Top Products
121
Editing a Tone (Pro Edit)
Com MOD COSM1/2 TVAOSC1/2 AP Syn Effects
Making Envelope Settings
Parameter Value Description
Velocity Curve
(Envelope Velocity Curve)
0–7 Choose from the following seven curves to specify how your keyboard playing
strength will affect the envelope depth. If you don’t want your keyboard playing
strength to affect the envelope depth, set this to “0”.
Velocity Sens
(Envelope Velocity Sensitiv-
ity)
-63– +63
Keyboard playing dynamics can be used to control the depth of the envelope. If you
want the envelope to have more effect for strongly played notes, set this parameter
to a positive (+) value. If you want the pitch envelope to have less effect for strongly
played notes, set this to a negative (-) value.
Velocity A-Sens
(Envelope Attack Time Ve-
locity Sensitivity)
-63– +63 This allows keyboard dynamics to affect the attack time of the envelope. If you want
attack time to be speeded up for strongly played notes, set this parameter to a pos-
itive (+) value. If you want it to be slowed down, set this to a negative (-) value.
Velocity D-Sens
(Envelope Decay Time Ve-
locity Sensitivity)
-63– +63
This allows keyboard dynamics to affect the decay time of the envelope. If you want
decay time to be speeded up for strongly played notes, set this parameter to a pos-
itive (+) value. If you want it to be slowed down, set this to a negative (-) value.
Velocity R-Sens
(Envelope Release Time Ve-
locity Sensitivity)
-63– +63
This allows key release speed to affect the release time of the envelope. If you want
release time to be speeded up for quickly released notes, set this parameter to a
positive (+) value. If you want it to be slowed down, set this to a negative (-) value.
ADSR Attack
(Envelope Attack Time)
0–127, Note
Specifies the attack time of the envelope (the time from when you press a key until
the envelope level reaches the maximum value).
ADSR Decay
(Envelope Decay Time)
0–127, Note Specifies the decay time of the envelope (the time from when the envelope level
reaches the maximum value until it falls to a constant value).
ADSR Sustain
(Envelope Sustain Level)
0–127
Specifies the sustain level of the envelope (the level at which the envelope remains
constant).
ADSR Release
(Envelope Release Time)
0–127, Note
Specifies the release time of the envelope (the time from when you release a key
until the envelope level reaches 0).
“ENVELOPE” in the lower right of the screen shows a graphical representation of
the envelope produced by the current settings.
Env Time KF
(Envelope Time Keyfollow)
-200– +200 Make this setting when you want the decay time and subsequent times of the enve-
lope to be affected by the location of the key you play. Based on the envelope times
for the C4 key (center C), positive (+) settings will cause notes higher than C4 to
have increasingly shorter times, and negative (-) settings will cause them to have in-
creasingly longer times. Larger settings will produce greater change.
0123
4567
C4C3C2C1 C5 C6 C7
0
+50
+100
-50
-100
Key
Time
V-Synth-GT_e.book 121 ページ ２００７年４月９日 月曜日 午後１時４６分