Filter
Top Products
96
Editing a Tone (Pro Edit)
Com MOD COSM1/2 TVA EffectsOSC1/2 AP Syn
fig.06b-21-ps.eps_50
OSC Type (Analog OSC)
Parameter
Value Description
Waveform
(Analog Oscillator Waveform)
Selects the wave upon which the
sound is to be based when using
an analog oscillator.
SAW:
Sawtooth wave
This contains numerous harmonics. It can be used as the basis for most
instrumental sounds. It is particularly suitable for brass instruments and
string instruments (such as violin or piano).
SQUARE:
Square wave
This contains a rich array of odd-numbered harmonics. It is suitable as
the basic sound material for woodwinds and percussion instruments
(such as clarinet or xylophone).
TRIANGLE:
Triangle wave
This contains relatively fewer harmonics. It is suitable as the material
for woodwind sounds (such as recorder or flute).
SINE: Sine wave This is the simplest waveform. It contains no harmonics at all, and
sounds like whistling.
RAMP:
Ramp wave
This is a trapezoidal waveform that is similar to a pulse wave.
JUNO:
Modulated sawtooth
wave
This is a modified sawtooth wave found on Roland’s
α
JUNO synthe-
sizer. It has a brighter sound than the conventional “SAW” waveform.
HQ-SAW:
High quality saw-
tooth wave
This is a high-quality sawtooth waveform that is free of the aliasing
noise that can be a problem on digital synthesizers. If you select HQ-
SAW, the Sub OSC, Pulse Width, and Fat parameters will be unavail-
able.
HQ-SQUARE:
High quality square
wave
This is a high-quality square waveform that is free of the aliasing noise
that can be a problem on digital synthesizers. If you select HQ-
SQUARE, the Sub OSC and Fat parameters will be unavailable.
NOISE:
Noise wave
This is white noise. You can use it to create the noise component of a
sound.
LA-SAW:
LA sawtooth wave
This simulates a waveform used in the LA (Linear Arithmetic) sound
generator of the Roland D-50. It has a milder sound than the conven-
tional “SAW” waveform.
LA-SQUARE:
LA square wave
This simulates a waveform used in the LA (Linear Arithmetic) sound
generator of the Roland D-50. It has a milder sound than the conven-
tional “SQUARE” waveform.
SUPER-SAW:
Super Saw
This is an intensified simulation of a feature found on the Roland JP-
8000/JP-8080. It is the sound of seven sawtooth waves played simul-
taneously. A pitch-shifted sound is added to the center. This is suitable
for creating rich sounds such as string-type sounds.
FBACK-OSC:
Feedback Oscillator
This is an intensified simulation of a feature found on the Roland JP-
8000/JP-8080. It is a sound that simulates guitar feedback. It is suit-
able for creating sharply aggressive sounds.
X-MOD-OSC:
Cross Modulation
Oscillator
This is an intensified simulation of a feature found on the Roland JP-
8000/JP-8080. It uses the OSC2 waveform to modulate the frequency
of OSC1.
V-Synth-GT_e.book 96 ページ ２００７年４月９日 月曜日 午後１時４６分