Filter
Top Products
150
Vocal Designer
fig.06d-10-ps.eps
Vocal Designer
Parameter
Value Description
Vocal Designer Switch
OFF, ON
Turns Vocal Designer on/off.
Mic
Level
0–127
Indicates the mic input level.
Use the panel INPUT MIC LEVEL knob to adjust the level so that the peak in-
dication does not light.
Carrier
OSC1 (Oscillator 1 Switch)
OFF, ON
Specifies whether the sound from OSC1 will be used as the carrier (ON) or
not (OFF).
OSC1 Waveform
(Oscillator 1 Waveform)
–
Selects the waveform that OSC1 will produce.
OSC1 Level (Oscillator 1 Level)
0–127
Specifies the level of OSC1.
OSC2 (Oscillator 2 Switch)
OFF, ON
Specifies whether the sound from OSC2 will be used as the carrier (ON) or
not (OFF).
OSC2 Waveform
(Oscillator 2 Waveform)
– Selects the waveform that OSC2 will produce.
OSC2 Level (Oscillator 2 Level)
0–127
Specifies the level of OSC2.
Vocoder
Level
0–127
Specifies the volume of Vocal Designer.
Natural Voice
0–127
Specifies the volume of the mic input sound (your own voice).
Effects
Chorus Send (Chorus Send Level)
0–127
Specifies the level of the signal sent to chorus.
Reverb Send (Reverb Send Level)
0–127
Specifies the level of the signal sent to reverb.
V-Synth-GT_e.book 150 ページ ２００７年４月９日 月曜日 午後１時４６分