Roland V-Synth GT Electronic Keyboard User Manual


 
203
System Mode (Settings Common to All Modes)
fig.08-11.eps_50
Controller (Controller-related Settings)
Keyboard
Parameter
Value Description
Keyboard Sens
(Keyboard Sensitivity)
Light
Sets the keyboard sensitivity to “light.”
Medium Sets the keyboard sensitivity to “normal.”
Heavy Sets the keyboard sensitivity to “heavy.”
Keyboard Velocity
REAL, 1–127
Specifies the velocity value that will be transmitted
when you play the keyboard. If you want actual key-
board velocity to be transmitted, set this to “REAL.” If
you want a fixed velocity value to be transmitted re-
gardless of how you play, specify the desired value
(1–127).
Aftertouch Sens
(Aftertouch Sensitivity)
0–200
Specifies the Aftertouch sensitivity. Higher values will
allow Aftertouch to be applied more easily. Normally
you will leave this at “100.”
Local Sw (Local Switch)
OFF, ON
The Local Switch determines whether the internal
sound generator is disconnected (OFF) from the con-
troller section (keyboard, pitch bend/modulation le-
ver, knobs, buttons, Time Trip Pad, D Beam
controller, pedal, and so on); or not disconnected
(ON). Normally this is left “ON,” but if you wish to
use the V-Synth GT’s keyboard and controllers to con-
trol only external sound modules, set it to “OFF.”
V-Synth-GT_e.book 203 ページ 2007年4月9日 月曜日 午後1時46分