Filter
Top Products
Com MOD COSM1/2 TVAOSC1/2 AP Syn Effects
88
Editing a Tone (Pro Edit)
Zone Settings (Zone)
On the V-Synth GT, the keyboard range is divided into up to 16 areas for each tone, allowing a different sound to be
played in each area. Each of these areas in the keyboard range is called a “zone.”
The following tone settings are applied in common to each of the individual sounds that are divided by zone.
• Common group settings (except for Structure Type)
• Effect group settings for the Tone-FX type, and effect settings
You can select a different structure for each zone, but if you select structure 5, all zones will be set to structure 5.
AP-Synthesis does not support Zones.
Splitting the Keyboard to Play Different Sounds (Split)
A patch that contains settings to play different patches in each keyboard zone is called a
split tone
. Here’s how to
create a split tone.
1.
In the Zone area of the Keyboard screen (p. 87), touch <Edit>.
The Tone Zone window appears.
fig.03-32_50
2.
In the lower part of the screen, touch <Split>.
A window like the following appears.
fig.11e
3.
Touch <01>.
Zone 01 will be selected, and the top note number of zone 01 will be displayed in the upper right of the screen.
Zone number
Range of notes that will sound for the specified zone
V-Synth-GT_e.book 88 ページ ２００７年４月９日 月曜日 午後１時４６分