Filter
Top Products
DDK-7 Owner’s Manual
135
Music Data Recorder (MDR)
7
Confirm that the desired song to be converted is displayed in the upper half of
the display. If you want to change the song, press the [CHANGE] button of the
Change From section to call up the Song Select display and select the desired
song.
Press the [CHANGE] button of the Change To section in the
display, then select the destination.
If the source song contains two or more Registration banks, you’ll need to make
ready the same number of destination songs to save the converted data.
Press the [EXECUTE] button in the display to start conversion.
A message appears, prompting confirmation of the operation. Select
[CONVERT] to convert to EL format, or [CANCEL] to abort the operation.
If the remaining memory of the floppy disk is insufficient, conversion cannot be
executed. (An error message appears and the operation is cancelled.)
Converting from EL format
You can convert the songs in the floppy disk created with an EL-series Electone, such as
the EL-900, to the DDK-7 format, and save it to a USB flash memory. To use the
floppy disk, you’ll need to install the optional UD-FD01 floppy disk drive. Depending
on the original song, the sound or tempo of the converted song may differ from the
original data, or the Next Song function of the original song may not be effective.
Insert the floppy disk that contains the song you want to convert,
then select the source song.
For details on selecting a song, see page 104.
In the TOOLS Page, press the [CONVERT FROM EL] button to call
up the Convert display.
NOTE
If the source song’s name
contains full size characters
or Japanese characters, the
converted song name will be
shown with question marks
(such as “????”).
3
4
NOTE
When you convert the
protected EL data to DDK-7
format, set the write-protect
tab of the EL disk to the
“overwrite” position (tab
closed).
1
2
NOTE
When converting a protected
EL song to the DDK-7 format,
make sure to use a USB flash
memory card with ID.