Filter
Top Products
4
Voice Controls and Effects
DDK-7 Owner’s Manual
54
PHASER
Similar to Flanger, this produces rolling timbre
changes and a pronounced up/down filter sweep
effect.
TREMOLO/AUTO PAN
This periodically changes the volume and has the
effect of moving the sound image both front and
back, and left and right.
Sensitivity 0 - 127 Determines the sensitivity.
The higher the value the
greater the change.
Threshold 0 - 127 Determines the input level at
which effect begins to be
applied.
Dry/Wet D63>W - D<W63 Determines the original
sound and the effect sound.
Effect Type
PHASER 1
PHASER 2
EP PHASER 1
EP PHASER 2
EP PHASER 3
TEMPO PHASER
DYNA PHASER
Parameter Value Description
LFO Freq. 0.00 - 39.7 Hz Determines the frequency of
oscillation, or the speed of
the wavering effect.
LFO Depth 0 - 127 Determines the depth of
oscillation, or the amount of
the wavering effect.
Phase Shift 0 - 127 Determines the phase
relationship between the
processed signal and the
original. This changes the
sound characteristics of the
Phaser effect.
Feedback
Level
-63 - +63 Determines the amount of
output sound (with the
phasing effect) that is
returned to the input. The
larger the value, the more
complex and pronounced the
phasing effect becomes.
Sensitivity 0 - 127 Determines the sensitivity.
The higher the value the
greater the change.
Threshold 0 - 127 Determines the input level at
which effect begins to be
applied.
Dry/Wet D63>W - D<W63 Determines the balance of
the original sound and the
effect sound.
Parameter Value Description
Effect Type Effect Type
TREMOLO 1 ORGAN TREMOLO
TREMOLO 2 AUTO PAN
XG TREMOLO XG AT PAN 1
EP TREMOLO XG AT PAN 2
GT TREMOLO 1 EP AUTO PAN
GT TREMOLO 2
Parameter Value Description
LFO Freq. 0.00 - 39.7 Hz Determines the tremolo
speed.
LFO Depth 0 - 127 Determines the depth of the
Tremolo effect.
AM Depth 0 - 127 Determines the amount of
volume change.
PM Depth 0 - 127 Determines the amount of
pitch change in the sound.
Input Mode Mono, Stereo Determines the input
configuration.
L/R Depth 0 - 127 Determines the depth of
panning between the left and
right channels.
F/R Depth 0 - 127 Front/rear. Determines the
depth of the front and rear
panning effect. This controls
both level and pitch at the
same time.
Pan L<->R, L->R, L<-R,
Lturn, Rturn, L/R
Determines the Auto Pan
type. (“L<->R” is a sine wave
and “L/R” is a sawtooth
wave.)
Dry/Wet D63>W - D<W63 Determines the balance of
original sound and the effect
sound.