Filter
Top Products
8
Voice Edit
DDK-7 Owner’s Manual
146
Press the [SAVE] button to save the Voice, or press [CANCEL] to
abort the operation.
After saving the Voice, be sure to quit the Voice Edit function (page 146) before
turning the power off. Turning off the DDK-7 without quitting Voice Edit erases the
User Voice you have edited.
You can quit the Voice Edit function from any of its display pages.
Press the [PROGRAM] button on the panel.
If your original Voice has already been saved, the Voice Edit function quits
automatically. If the edited Voice has not been saved, a message appears
prompting confirmation of the operation.
Select [EXIT] to quit the Voice Edit function, or [CANCEL] to abort
the operation and return to the previous display.
Once your original AWM Voice has been saved, it can be selected from the User menu
in each Voice section. Refer to chapter 2, “Selecting Voices with the Voice buttons”
(page 26).
This operation automatically erases any Voice that had been previously
saved to the selected User Voice number. Be careful not to erase any
important data. Always save your important data in advance to a USB flash
memory or other external media using the M.D.R. function.
4
Quitting Voice Edit
When quitting Voice Edit, the square at the top left of the display turns light
blue for a few seconds, indicating that the Voice you have created is
currently being saved. Do not turn the power off while the Voice is being
saved.
5
Recalling an Edited Voice
4
1
2