Filter
Top Products
4
Voice Controls and Effects
DDK-7 Owner’s Manual
45
You can edit the effect parameters from these two displays. Both displays have the same
contents. You can select two effects for each Voice section with these displays (Voice
Condition Pages 3 and 4).
1 EFFECT 1 (Page 3)/EFFECT 2 (Page 4)
Selects the effect category. Pressing the effect button on the display calls up the effect
category list. Select the desired effect category in the list.
By selecting [PRESET] in the list, the original (factory) effect category for the selected
Voice is automatically set. Selecting [THRU] bypasses the effect (no effect is added to
the selected Voice).
2 TYPE 1 (Page 3)/ TYPE 2 (Page 4)
Determines the type of the effect. Pressing the TYPE button on the display calls up the
effect type list, corresponding to the selected effect category. Select the desired effect
type in the list.
If you have selected the [PRESET] category, the effect type cannot be edited.
After changing the effect type, the effect parameter below is automatically changed
corresponding to the selected effect type.
3 Effect Parameters
Effect parameters are displayed corresponding to the selected effect type.
3
2
1
Voice Condition [Page 3, 4]
Reference Page
Effect List (page 52)