Filter
Top Products
Organ Flutes
3
DDK-7 Owner’s Manual
38
Adjust flute footage settings (over a range of 0 – 8).
The Flute footage levers can be adjusted by directly touching the display.
The Data Control dial cannot be used. Play the keyboard and listen to the
changes in the sound as you adjust the footage levels.
Press the [ATTACK/VOLUME] button in the upper right on the
display to adjust the volume and attack settings.
1 ATTACK
Determines the level of each volume in the percussive portion of the Voice. Footage
settings are 4', 2-2/3' and 2'. The LENGTH lever determines the duration of the
attack sound.
2 RESP. (Response)
Determines the overall speed of the keyboard response. Moving the lever downward
makes the keyboard response slower, creating a pipe organ effect.
3 MODE
Determines which notes in a held group of notes are given an attack sound.
This parameter is common to both Upper and Lower Organ Flute Voices.
FIRST: Only the first note played will have attack. All other notes played while
the first is held have no attack.
EACH: All notes played have an attack sound.
4 REVERB
Reference Page
Reverb (page 46)
Determines the amount of reverb applied to the Organ Flute Voice. When the reverb
depth in the REVERB Page 1 control is set to the minimum, the setting here will have
no effect.
5 VOLUME
Determines the overall volume of the Organ Flute Voice. The volume balance of the
individual footages is maintained. A minimum setting here produces no Organ Flute
sound.
4
5
1
23
4 5
ATTACK/VOLUME Page