Filter
Top Products
DDK-7 Owner’s Manual
189
9
Rhythm Program
Press the DATA [SET] button in the display.
The Registration number appears in the display (in the timing order), indicating
that the Registration is entered. Up to 140 Registrations can be entered.
If some Registration numbers are entered to the same Bar/Beat/Clock, the last
entered one takes priority.
Repeat steps #2 through #4 above to set the Registration
Sequence.
Entering Next Regist:
When you program the Next Regist function in Registration Sequence, the next
registration data in current song can be loaded automatically just by playing the
rhythm sequence.
Using the buttons in the display or the Data Control
dial, set the Bar/Beat/Clock position at which you want to enter
the Next Regist (1 beat = 96 clock).
Press the NEXT REGIST [INSERT] button in the display.
The Next Regist mark appears at the timing point you set in step #1,
indicating that the Next Regist is entered.
Editing an Existing Registration Sequence
You can move or delete the entered Registration Sequence (Registration number or
Next Regist data) from the sequence.
To move an entry:
Using the POSITION buttons, move the cursor and select the data
(Registration number or Next Regist) you want to move.
Change the position by pressing the Bar/Beat/Clock buttons in
the display.
Next Regist Loading Time
• Loading Next Regist may take a few seconds (the time may differ depending on
the size of the data to be loaded).
• When using a floppy disk instead of USB flash memory, the loading time will be
longer than when using USB flash memory.
•Next Registration data can be loaded by two ways: using optional foot pedal/right
footswitch and programming Next Regist in the Registration Sequence. Loading
time is the same regardless of which way you load the Next Registration data.
4
5
1
2
1
2