Filter
Top Products
4
Voice Controls and Effects
DDK-7 Owner’s Manual
59
DYNA RINGMOD
RING MOD
ISOLATOR
THRU
Bypass control. This cancels the effect processing.
Level Offset 0 - 127 Determines the offset values
of the filter frequency. The
offset value affects the filter
frequency when no control
signals are received.
Filter Type LPF (12 dB),
LPF (18 dB),
LPF (24 dB),
HPF, BPF, BEF
Determines the filter type.
Resonance -16 - +111 The higher the value, the
more sharp the frequency
response curve is.
Dry/Wet D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Parameter Value Description
Sensitivity 0 - 127 Determines the modulation
sensitivity for the input
change.
Threshold 0 - 127 Determines the input level at
which effect begins to be
applied.
Dry/Wet D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Parameter Value Description
Frequency 0.7 - 5002.6 Hz Determines the frequency for
the Amplitude Modulation.
Frequency
Fine
0 - 127 Determines detailed
adjustment of the Amplitude
Modulation.
LFO Wave Triangle, Sine Selects a triangular wave or
sine wave as the wave for
modulation.
LFO Depth 0 - 127 Determines the wave depth.
The higher the value, the
greater the effect.
Dry/Wet D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Parameter Value Description
On/Off Off, On Determines the on/off status
for the effect.
Low Mute Off, On Mute switch for the low
frequency range.
Middle Mute Off, On Mute switch for the mid
frequency range.
High Mute Off, On Mute switch for the high
frequency range.
Low Level 0 - 127 Determines the level of the
low frequencies.
Middle Level 0 - 127 Determines the level of the
mid frequencies.
High Level 0 - 127 Determines the level of the
high frequencies.
Parameter Value Description
Effect Type
Thru