Filter
Top Products
4
Voice Controls and Effects
DDK-7 Owner’s Manual
53
ER/KARAOKE
Produces early reflections without the subsequent
reverb, or a deep echo effect like that used in Karaoke
sing-along applications.
CHORUS
Creates a warm effect as if several of the same sound
were playing at once. Makes the overall sound richer,
“fatter” and more animated.
FLANGER
This creates a metallic periodic “sweeping” effect,
similar to Chorus but with a brighter more resonant
sound.
Effect Type
ER 1
ER 2
GATE REVERB
REVERS GATE
KARAOKE 1
KARAOKE 2
KARAOKE 3
Parameter Value Description
Type S-H, L-H, Rdm,
Rvs, Plt, Spr
Determines the early
reflection type. The response
of the early reflections varies
depending on the type.
Room Size 0.1 - 7.0 Determines the room size.
The higher the value the
longer the ER.
Type Type A, Type B Determines the reverse gate
type.
DelayTime 0.1 - 400 msec Determines the time that
elapses between the original
sound and the delayed
repeat.
Feedback
Level
-63 - +63 Determines the amount of
delayed repeats in the
sound. When this is set to
0%, the delayed repeat from
the second time will not
sound.
Dry/Wet D63>W - D<W63 Determines the balance of
the original sound and effect
sound.
Effect Type Effect Type
CHORUS 1 GM CHORUS 4
CHORUS 2 FB CHORUS
XG CHORUS 1 CELESTE 1
XG CHORUS 2 CELESTE 2
XG CHORUS 3 CELESTE 3
XG CHORUS 4 CELESTE 4
GM CHORUS 1 SYMPHONIC
GM CHORUS 2 XG SYMPHONIC
GM CHORUS 3 ENS DETUNE
Parameter Value Description
LFO Freq. 0.00 - 39.7 Hz Determines the frequency of
oscillation, or the speed of
the wavering effect.
LFO Depth 0 - 127 Determines the depth of
oscillation, or the amount of
the wavering effect.
Input Mode Mono, Stereo Determines the input
configuration.
Detune -50 - +50 cent Determines the amount of
detuning (or pitch shifting) is
applied to the delayed
repeats.
L DelayTime 0.0 - 50.0 msec Determines the time that
elapses between the original
sound and the delayed
repeat in the left channel.
R DelayTime 0.0 - 50.0 msec Determines the time that
elapses between the original
sound and the delayed
repeat in the right channel.
Dry/Wet D63>W - D<W63 Determines the balance of
the original sound and the
effect sound.
Effect Type
FLANGER 1
FLANGER 2
XG FLANGER 1
XG FLANGER 2
XG FLANGER 3
GM FLANGER
V_FLANGER
TEMP FLANGER
DYNA FLANGER
Parameter Value Description
LFO Freq. 0.00 - 39.7 Hz Determines the frequency of
oscillation, or the speed of
the wavering effect.
LFO Depth 0 - 127 Determines the depth of
oscillation, or the amount of
the wavering effect.
FEEDBACK
LEVEL
-63 - +63 Determines the amount of
output sound (with the
flanging effect) that is
returned to the input. The
larger the value, the more
complex and pronounced the
flanging effect becomes.
LFO Wave Triangle, Sine,
Random
Determines the waveform:
triangular wave, sine wave or
random.