ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
received. (p. 162)
■
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.
(p. 163)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN. (p. 163)
■ validate -- Specifies the validation for server response. (p. 165)
■ keep -- Specifies that no option 82 field will be added or replaced, if option 82 field(s) already
exists in the client DHCP packet. (p. 163)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
received. (p. 162)
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.
(p. 163)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN. (p. 163)
■ replace -- Specifies that any existing option 82 fields will be replaced with switch option 82
field for client DHCP packet. (p. 164)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request was
received. (p. 162)
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default value.
(p. 163)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN. (p. 163)
■ validate -- Specifies the validation for server response. (p. 165)
■ validate -- Specifies the validation for server response. (p. 165)
■ append -- Specifies that the option 82 field should be appended to client DHCP packet.
(p. 161)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request
was received. (p. 162)
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default
value. (p. 163)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN. (p.
163)
■ drop -- Specifies that the DHCP packet will be dropped unconditionally, if option 82
field(s) already exists in the client DHCP packet. (p. 161)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request
was received. (p. 162)
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default
value. (p. 163)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN. (p.
163)
■ replace -- Specifies that any existing option 82 fields will be replaced with switch option
82 field for client DHCP packet. (p. 164)
■ ip -- Sets the remote id to be the IP address of the VLAN on which the client request
was received. (p. 162)
■ mac -- Sets the remote id to be the MAC address of the switch. This is the default
value. (p. 163)
■ mgmt-vlan -- Sets the remote id to be the IP address of the Management VLAN. (p.
163)
COMMAND DETAILS
option (p. 164)ip (p. 162)82 (p. 161)
replace (p. 164)keep (p. 163)append (p. 161)
validate (p. 165)mac (p. 163)drop (p. 161)
mgmt-vlan (p. 163)hop-count-increment (p. 162)
160© 2009 Hewlett-Packard Development Company, L.P.
dhcp-relayCommand Line Interface Reference Guide
