lacp
■ show lacp
Usage: show lacp
Description: Show status of LACP trunks.
Next Available Option:
■ distributed -- Show distributed lacp of local and remote switch(p. 549)
learned
■ show ip pim rp-set learned
Show RP-Set information learned from the BSR.
licenses
■ show licenses
Usage: show licenses [uninstalled]
Description: Display license status for premium features. Use 'uninstalled'
to display the uninstall verication key for features which
have been uninstalled.
Next Available Option:
■ uninstalled -- Display verification key for features which have been uninstalled. (p. 601)
link-keepalive
■ show link-keepalive
Usage: show link-keepalive [statistics]
Description: show link-keepalive information on the switch.
'show link-keepalive' command displays all the ports that are
enabled for link-keepalive. 'show link-keepalive statistics'
command displays detailed statistics like UDLD packets sent,
UDLD packets received etc for all link-keepalive enabled ports.
Next Available Option:
■ statistics -- show detailed statistics for all link-keepalive enabled ports.(p. 594)
link-state
■ show ip ospf link-state
Usage: show ip ospf link-state [OSPF-AREA-ID] [status|advertise]
Description: Show all Link State Advertisements from throughout
the areas to which the device is attached.
The 'status' keyword is optional and does not affect the
command output. If the 'advertise' is specied, each LSA
is shown as a stream of bytes in hexadecimal notation.
565© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
