A SERVICE OF

logo

Description: Show Web/MAC Authentication statistics and conguration. If
PORT-LIST parameter is specied then information only for the
specied ports is shown.
Next Available Options:
authenticator -- Show 802(p. 531)
mac-based -- Show MAC Authentication statistics and configuration(p. 568)
web-based -- Show Web Authentication statistics and configuration(p. 609)
-a
show logging -a
Display all log events, including those from previous boot cycles.
access-list
show access-list
Usage: show access-list [cong] |
[vlan <VLAN-ID>] |
[<ACL-ID> [cong]] |
[resources] |
[radius] |
[ports <PORT-LIST>]
Description: Show Access Control List information. If no parameters
are specied, a summary table is displayed.
Parameters:
o cong - Display all congured ACL's on the switch using
the CLI syntax used to create them.
o vlan <VLAN-ID> - Display Access Control Lists currently applied
to the specied VLAN.
o <ACL-ID> - Display detailed information on the specied ACL.
o resources - Display ACL Rules/Masks availability.
o radius - Display ACLs applied via RADIUS.
o ports - Show ACLs applied to the specied ports.
Next Available Options:
radius -- Display ACLs applied via RADIUS. ([ethernet] PORT-LIST) (p. 583)
config -- Show all configured ACL's on the switch using the CLI syntax used to create them.
(p. 540)
vlan -- Show ACLs applied to the specified VLAN. (VLAN-ID) (p. 603)
ports -- Show ACLs applied to the specified ports. ([ethernet] PORT-LIST) (p. 580)
acl-name -- Display detailed information on specified ACL. (ASCII-STR) (p. 528)
resources -- Display ACL Rules/Masks availability.(p. 585)
access-rights
show snmpv3 access-rights
Show information about access rights.
527© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide