dhcp
■ [no] vlan VLAN-ID ipv6 address dhcp
Congure a DHCPv6 client.
Next Available Option:
■ full -- Obtain IPv6 address & Configuration information from DHCPv6 server.(p. 725)
dhcp-bootp
■ vlan VLAN-ID ip address dhcp-bootp
Congure the interface to use DHCP/Bootp server to acquire parameters.
dhcp-snooping
■ [no] vlan VLAN-ID dhcp-snooping
direction
■ [no] vlan VLAN-ID ip access-group ACCESS-GROUP < in | out | connection-rate-filter | ... >
Supported Values:
■ in -- Match inbound packets
■ out -- Match outbound packets
■ connection-rate-filter -- Manage packet rates
■ vlan -- VLAN acl
domain-name
■ [no] vlan VLAN-ID igmp-proxy < END OF PRINTABLE >
Specify the domain name to associate/disassociate with the VLAN.
Supported Values:
■ END OF PRINTABLE
dr-priority
■ vlan VLAN-ID ip pim-sparse dr-priority INTEGER
Usage: ip pim-sparse dr-priority <0-2147483647>
Description: Set the priority value to use on the interface in the Designated
Router election process. Default is 1.
dscp
■ vlan VLAN-ID qos dscp
Specify DSCP policy to use.
Next Available Options:
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 728)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 720)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 752)
722© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
