dyn-autz-port
■ radius-server dyn-autz-port < 1024 to 49151 >
UDP port number to listen for Change-of-Authorization and Disconnect messages
(default is 3799).
Range: < 1024 to 49151 >
host
■ [no] radius-server host IP-ADDR
IP address of the RADIUS server to use.
Next Available Options:
■ acct-port -- Accounting UDP destination port number (default is 1813).(p. 458)
■ auth-port -- Authentication UDP destination port number (default is 1812).(p. 459)
■ dyn-authorization -- Enable/disable dynamic authorization control from this host.(p. 459)
■ time-window -- time window (in seconds) within which the received dynamic authorization
requests are considered to be current and accepted for processing. (p. 461)
■ key -- Encryption key to use with the RADIUS server (default is NULL).(p. 460)
key
■ radius-server host IP-ADDR acct-port TCP/UDP-PORT key KEY
Encryption key to use with the RADIUS server (default is NULL).
■ radius-server host IP-ADDR auth-port TCP/UDP-PORT key KEY
Encryption key to use with the RADIUS server (default is NULL).
■ [no] radius-server host IP-ADDR key
Encryption key to use with the RADIUS server (default is NULL).
Next Available Option:
■ key -- Encryption key to use with the RADIUS server (default is NULL). (ASCII-STR) (p. 460)
■ radius-server host IP-ADDR key KEY
Encryption key to use with the RADIUS server (default is NULL).
Next Available Options:
■ acct-port -- Accounting UDP destination port number (default is 1813). (TCP/UDP-PORT) (p.
458)
■ auth-port -- Authentication UDP destination port number (default is 1812). (TCP/UDP-PORT)
(p. 459)
■ [no] radius-server key
Global encryption key (default is NULL).
Next Available Option:
■ key -- Encryption key to use with the RADIUS server (default is NULL). (ASCII-STR) (p. 460)
460© 2009 Hewlett-Packard Development Company, L.P.
radius-serverCommand Line Interface Reference Guide
