■ V1-only -- Send RIP version 1 updates only.
■ V1-compatible-V2 -- Send RIP 2 updates using RFC 1058 route subsumption.
■ V2-only -- Send RIP version 2 updates only.
service-policy
■ [no] vlan VLAN-ID service-policy SERVICE-POLICY
Usage: [no] service-policy <name> in
Description: Apply the QoS/Mirror policy on the vlan.
Parameters:
o <name> - Policy name.
o in - Apply the policy in inbound direction.
Next Available Option:
■ in -- Apply policy on inbound packets. (p. 728)
src-ip
■ vlan VLAN-ID connection-rate-filter unblock IP-ADDR/mask-LENGTH
Match packets from the specied subnet.
tagged
■ [no] vlan VLAN-ID tagged [ETHERNET] PORT-LIST
Usage: [no] tagged [ethernet] PORT-LIST
Description: Assign ports to current VLAN as tagged.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
timer-interval
■ vlan VLAN-ID ip-recv-mac-address MAC-ADDR interval < 1 to 255 >
Timeout interval in seconds <1-255>.
Range: < 1 to 255 >
track
■ [no] vlan VLAN-ID vrrp vrid < 1 to 255 > track
Usage: [no] vrrp vrid <VRID> track <vlan <VLAN-ID-RANGE>|interface <LPORT-LIST>>
no vrrp vrid <VRID> track
Description: Enable/disable tracking for VR.
Next Available Options:
■ interface -- Enable/disable tracking of logical ports for VR(p. 728)
■ vlan -- Enable/disable tracking of VLANs for VR(p. 750)
748© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide
