Specify DSCP policy to use.
Next Available Options:
■ integer-range < 0 to 63 > -- Specify the DSCP code-point in decimal. (p. 667)
■ binary-range < 0 to 63 > -- Specify the DSCP code-point in binary. (BINARY) (p. 666)
■ well-defined < af11 | af12 | af13 | ... > -- Define mapping between a DSCP (Differentiated-Services
Codepoint) value and an 802(p. 672)
enable
■ [no] svlan VLAN-ID ipv6 enable
Enable IPv6 on an interface and congures an automatically generated link-local addr.
eui-64
■ [no] svlan VLAN-ID ipv6 address IPV6-ADDR/PREFIX-LEN eui-64
An IPv6 EUI-64 address that can be automatically congured on any interface
forbid
■ [no] svlan VLAN-ID forbid [ETHERNET] PORT-LIST
Usage: [no] forbid [ethernet] PORT-LIST
Description: Prevent ports from becoming a member of the current VLAN.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
full
■ [no] svlan VLAN-ID ipv6 address dhcp full
Obtain IPv6 address & Conguration information from DHCPv6 server.
Next Available Option:
■ rapid-commit -- Obtain IPv6 address quickly from DHCPv6 server.(p. 671)
host
■ svlan VLAN-ID connection-rate-filter unblock host IP-ADDR
Match packets from the specied IP address.
integer-range
■ svlan VLAN-ID qos dscp < 0 to 63 >
Specify the DSCP code-point in decimal.
Range: < 0 to 63 >
ip
■ svlan VLAN-ID ip
667© 2009 Hewlett-Packard Development Company, L.P.
svlanCommand Line Interface Reference Guide
