■ show config -- Show the switch startup configuration (p. 540)
■ filename < config | config1 > -- Display specified configuration. (p. 551)
■ files -- List saved configuration files. (p. 551)
■ status -- Check if the running configuration differs from the statup configuration. (p. 596)
■ show connection-rate-filter -- List the ports and the on/off connection-rate-filter status and sensitivity
(p. 543)
■ all-hosts -- Show blocked and throttled IP addresses. (p. 529)
■ blocked-hosts -- Show blocked IP addresses. (p. 534)
■ throttled-hosts -- Show throttled IP addresses. (p. 599)
■ show console -- Show serial link/console settings (p. 543)
■ show cpu -- Show average CPU utilization over the last 1, 5, and 60 seconds; or the number of
seconds specified (p. 543)
■ slot -- Display module CPU statistics. (SLOT-ID-RANGE) (p. 591)
■ slave_time < 1 to 90 > -- Time (seconds) over which to average CPU utilization. (NUMBER)
(p. 591)
■ time < 1 to 300 > -- Time (seconds) over which to average CPU utilization. (NUMBER) (p. 599)
■ show crypto -- Display flash files used for authentication (p. 544)
■ autorun-cert -- Display trusted certificate. (p. 533)
■ autorun-key -- Display autorun key. (p. 533)
■ client-public-key -- Display ssh authorized client public keys. (p. 537)
■ babble -- Display phonetic hash. (p. 533)
■ fingerprint -- Display hexadecimal hash. (p. 552)
■ keyfile < manager | operator > -- Choose to display manager or operator keys. (p. 564)
■ babble -- Display phonetic hash. (p. 533)
■ fingerprint -- Display hexadecimal hash. (p. 552)
■ keylist -- Select keys to display (comma-delimited list). (ASCII-STR) (p. 564)
■ babble -- Display phonetic hash. (p. 533)
■ fingerprint -- Display hexadecimal hash. (p. 552)
■ host-cert -- Display https certificate information. (p. 555)
■ host-public-key -- Display ssh host RSA public key. (p. 555)
■ babble -- Display phonetic hash. (p. 533)
■ fingerprint -- Display hexadecimal hash. (p. 552)
■ show debug -- Display currently active debug log destinations and types (p. 545)
■ buffer -- Show the contents of the debug log buffer (p. 535)
■ -c -- Stop after displaying <count> messages. (NUMBER) (p. 536)
■ option -- Filter messages shown to those matching a string up to 64 chars. (ASCII-STR) (p.
574)
■ -r -- Display messages in reverse order (most recent first). (p. 583)
■ show dhcp-relay -- Shows the current status of DHCP Relay Agent, option 82 statistics and BOOTP
Gateway for configured interfaces (p. 548)
■ bootp-gateway -- Show the configured BOOTP gateway for configured interfaces (p. 534)
■ vlan -- Show the configured BOOTP Gateway for VLAN. (p. 603)
■ vlan -- (VLAN-ID) (p. 603)
■ show dhcp-snooping -- Display DHCP snooping information (p. 548)
■ binding -- Display DHCP snooping binding information. (p. 534)
■ stats -- Display DHCP snooping events. (p. 596)
■ show fastboot -- Shows the current status of fastboot on switch (p. 551)
■ show fault-finder -- Show the fault-finder table (p. 551)
■ show feature-coordinator -- Display the feature coordination restrictions (p. 551)
■ show filter -- Show a table of security filters or a filter detailed information, if the filter's INDEX is
specified (p. 552)
■ INDEX -- Show detailed information for the filter identified by the INDEX. The indices are
displayed by the 'show filter' command. (p. 557)
512© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
