primary < local | tacacs | radius > -- Specify the primary authentication method for access
control. (p. 44)
■
■ secondary < local | none | authorized > -- Specify the backup authentication method
for access control. (p. 48)
■ login -- Specify that switch respects the authentication server's privilege level (p. 36)
■ privilege-mode -- Specify that switch respects the authentication server's privilege level (p.
47)
■ mac-based -- Configure authentication mechanism used to control mac-based port access to
the switch (p. 37)
■ primary < chap-radius | peap-mschapv2 > -- Specify the primary authentication method
for access control. (p. 44)
■ secondary < none | authorized > -- Specify the backup authentication method for access
control. (p. 48)
■ num-attempts < 1 to 10 > -- Specify the maximum number of login attempts allowed (p. 42)
■ port-access -- Configure authentication mechanism used to control access to the network (p.
42)
■ primary < local | eap-radius | chap-radius > -- Specify the primary authentication method
for access control. (p. 44)
■ secondary < none | authorized > -- Specify the backup authentication method for access
control. (p. 48)
■ ssh -- Configure authentication mechanism used to control SSH access to the switch (p. 50)
■ enable -- Configure access to the privileged mode commands. (p. 33)
■ primary < local | tacacs | radius | ... > -- Specify the primary authentication method for
access control. (p. 44)
■ secondary < local | none | authorized > -- Specify the backup authentication method
for access control. (p. 48)
■ login -- Configure login access to the switch. (p. 36)
■ primary < local | tacacs | radius | ... > -- Specify the primary authentication method for
access control. (p. 44)
■ secondary < local | none | authorized > -- Specify the backup authentication method
for access control. (p. 48)
■ telnet -- Configure authentication mechanism used to control telnet access to the switch (p.
52)
■ enable -- Configure access to the privileged mode commands. (p. 33)
■ primary < local | tacacs | radius > -- Specify the primary authentication method for access
control. (p. 44)
■ secondary < local | none | authorized > -- Specify the backup authentication method
for access control. (p. 48)
■ login -- Configure login access to the switch. (p. 36)
■ primary < local | tacacs | radius > -- Specify the primary authentication method for access
control. (p. 44)
■ secondary < local | none | authorized > -- Specify the backup authentication method
for access control. (p. 48)
■ web -- Configure authentication mechanism used to control web access to the switch (p. 54)
■ enable -- Configure access to the privileged mode commands. (p. 33)
■ primary < local | radius > -- Specify the primary authentication method for access control.
(p. 44)
■ secondary < local | none | authorized > -- Specify the backup authentication method
for access control. (p. 48)
■ login -- Configure login access to the switch. (p. 36)
■ primary < local | radius > -- Specify the primary authentication method for access control.
(p. 44)
22© 2009 Hewlett-Packard Development Company, L.P.
aaaCommand Line Interface Reference Guide
