A SERVICE OF

logo

Open as PDF
next previous
solicitation requests sent for an unresolved destination,
or between duplicate address detection neighbor solicitation
requests. When set to a non-default value, this is included in
router advertisements as the ra-retranstime value.
Next Available Option:
■ number < 1000 to 3600000 > -- Configures the neighbor discovery time between neighbor
solicitation requests sent for an unresolved destination, or between duplicate address detection
neighbor solicitation requests(p. 738)
number
■ vlan VLAN-ID ip irdp preference < -2147483647 to 2147483647 >
The router preferability number. Higher values are more preferable.
Range: < -2147483647 to 2147483647 >
■ vlan VLAN-ID ipv6 nd ns-interval < 1000 to 3600000 >
Usage: [no] ipv6 nd ns-interval <milliseconds>
Description: Congures the neighbor discovery time between neighbor
solicitation requests sent for an unresolved destination,
or between duplicate address detection neighbor solicitation
requests. When set to a non-default value, this is included in
router advertisements as the ra-retranstime value.
Range: < 1000 to 3600000 >
■ vlan VLAN-ID ipv6 nd reachable-time < 1000 to 3600000 >
Usage: [no] ipv6 nd ra-lifetime <seconds>
Description: Congures the router lifetime sent in router advertisements.
A value of 0 tells hosts on the interface to not use this
router as a default router.
Range: < 1000 to 3600000 >
ospf
■ [no] vlan VLAN-ID ip ospf
Usage: [no] ip ospf [...]
Description: Enable/disable/congure Open Shortest Path First (OSPF)
protocol on the VLAN interface.
Called without 'no', the command enables OSPF on the interface.
Otherwise ('no' is specied), the command disables OSPF on the
interface. The command can be followed by an OSPF conguration
command. Use 'ip ospf ?' to get a list of all possible options.
This is a VLAN context command. It can be called directly
from the VLAN context or follow the 'vlan VLAN-ID'
command.
Next Available Options:
■ passive -- Configures an ospf interface as passive. (p. 739)
■ area -- Specify an OSPF area.(p. 716)
■ authentication-key -- Set simple authentication method and key.(p. 717)
738© 2009 Hewlett-Packard Development Company, L.P.
vlanCommand Line Interface Reference Guide