Usage: show ipv6 routers vlan <VLANID>
Description: Show the IPv6 Router table entries.
Next Available Option:
■ vlan -- Show the IPv6 Router Table Entries for VLAN.(p. 603)
rp-candidate
■ show ip pim rp-candidate
Usage: show ip pim rp-candidate [cong]
Description: Show Candidate-RP operational and conguration information.
When invoked without parameter shows current operational status
of the Candidate-RP.
Next Available Option:
■ config -- Show C-RP configuration information. (p. 540)
rp-pending
■ show ip pim rp-pending
Show (*,*,RP) Join Pending Information.
rp-set
■ show ip pim rp-set
Usage: show ip pim rp-set [static|learned]
Description: Show RP-Set information available on the router.
When invoked without parameters shows all statically congured
and dynamically learned entries. If keyword 'static' is specied
the information about statically congured entries is shown.
If keyword 'learned' is specied the information learned from
the BSR is shown.
Next Available Options:
■ static -- Show statically configured RP-Set information. (p. 594)
■ learned -- Show RP-Set information learned from the BSR. (p. 565)
running-config
■ show running-config
Usage: show running-cong [status]
Description: Show the switch running conguration. If the status
keyword is specied check if there are changes in running
conguration not saved to startup conguration le.
Next Available Option:
■ status -- Check if the running configuration differs from the statup configuration.(p. 596)
588© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
