A SERVICE OF

logo

router ospf area backbone nssa < 0 to 16777215 > no-summary
Do not send summary LSA into the area.
router ospf area backbone stub no-summary
Do not send summary LSA into the area.
nssa
router ospf area OSPF-AREA-ID nssa < 0 to 16777215 >
Dene a "not-so-stubby" area (or NSSA) and its cost.
Range: < 0 to 16777215 >
Next Available Options:
metric-type < type1 | type2 > -- Metric type of the type-7 default.(p. 482)
no-summary -- Do not send summary LSA into the area.(p. 482)
router ospf area backbone nssa < 0 to 16777215 >
Dene a "not-so-stubby" area (or NSSA) and its cost.
Range: < 0 to 16777215 >
Next Available Options:
metric-type < type1 | type2 > -- Metric type of the type-7 default.(p. 482)
no-summary -- Do not send summary LSA into the area.(p. 482)
ospf
[no] router ospf
Usage: [no] router ospf [...]
Description: Enable/disable/congure Open Shortest Path First (OSPF)
protocol on the device, or enter OSPF Conguration Context.
Called without 'no', the command enables OSPF on the device
and changes current context to OSPF Conguration Context.
Otherwise ('no' is specied) the command disables OSPF. The
command can be followed by an OSPF conguration command. Use
'router ospf ?' to get a list of all possible options.
Next Available Options:
area -- Define/remove an OSPF area, area range or virtual link(p. 474)
default-metric < 0 to 16777215 > -- The default metric used for advertising external routes
imported into OSPF by this router(p. 478)
distance -- Set administrative distance to associate with intra-area, inter-area and AS-external
routes learned by OSPF(p. 479)
metric-type < type1 | type2 > -- The default metric type used for advertising external routes
imported into OSPF by this router(p. 482)
redistribute < connected | static | rip > -- Specify source protocols which will be redistributed
into OSPF(p. 485)
restrict -- Prevent redistribution of routes via OSPF(p. 485)
rfc1583-compatibility -- Enable/disable RFC-1583 compatibility(p. 486)
483© 2009 Hewlett-Packard Development Company, L.P.
routerCommand Line Interface Reference Guide