auth-port
■ radius-server host IP-ADDR acct-port TCP/UDP-PORT auth-port TCP/UDP-PORT
Authentication UDP destination port number (default is 1812).
■ radius-server host IP-ADDR auth-port
Authentication UDP destination port number (default is 1812).
Next Available Option:
■ auth-port -- Authentication UDP destination port number (default is 1812). (TCP/UDP-PORT)
(p. 459)
■ radius-server host IP-ADDR auth-port TCP/UDP-PORT
Authentication UDP destination port number (default is 1812).
Next Available Options:
■ acct-port -- Accounting UDP destination port number (default is 1813). (TCP/UDP-PORT) (p.
458)
■ key -- Encryption key to use with the RADIUS server (default is NULL). (ASCII-STR) (p. 460)
■ radius-server host IP-ADDR key KEY auth-port TCP/UDP-PORT
Authentication UDP destination port number (default is 1812).
dead-time
■ [no] radius-server dead-time
Server unavailability time (default is 0, use the 'no'
form of command to set the dead-time to 0).
Supported Values:
■ Min
■ Max
Next Available Option:
■ dead-time < 1 to 1440 > -- Server unavailability time (default is 0, use the 'no' form of command
to set the dead-time to 0).(p. 459)
■ radius-server dead-time < 1 to 1440 >
Server unavailability time (default is 0, use the 'no'
form of command to set the dead-time to 0).
Range: < 1 to 1440 >
dyn-authorization
■ [no] radius-server host IP-ADDR dyn-authorization
Enable/disable dynamic authorization control from this host.
459© 2009 Hewlett-Packard Development Company, L.P.
radius-serverCommand Line Interface Reference Guide
