password
OVERVIEW
Switch ManagementCategory:
configPrimary context:
front-panel-security (page 190)Related Commands
show (page 511)
Usage: [no] password <manager|operator|port-access|all>
[user-name ASCII-STR] [<plaintext|sha1> ASCII-STR]
Description: Set or clear local password/username for a given access level.
Invoked without 'no', the command sets or changes existent
password(s). If no password provided in the command, the user
will be prompted to enter the new password twice. The command
removes specic local password protection, if preceded by 'no'.
Parameters:
o <manager|operator|port-access|all> - Level of access.
o user-name ASCII-STR - Username (up to 16 characters).
o <plaintext|sha-1> ASCII-STR - Format for the password entry, and
the password itself (up to 16 characters). 'plaintext' is
default type, and the only type accepted for 'port-access'.
COMMAND STRUCTURE
■ [no] password access < operator | manager > -- Set or clear local password/username for a given
access level (p. 388)
■ plaintext -- Enter plaintext password. (p. 390)
■ password -- Set password (ASCII-STR) (p. 389)
■ sha0 -- Enter SHA-0 hash of password. (p. 390)
■ password -- Set password (ASCII-STR) (p. 389)
■ sha1 -- Enter SHA-1 hash of password. (p. 390)
■ password -- Set password (ASCII-STR) (p. 389)
■ user-name -- Set username for the specified user category. (ASCII-STR) (p. 391)
■ plaintext -- Enter plaintext password. (p. 390)
■ password -- Set password (ASCII-STR) (p. 389)
■ sha0 -- Enter SHA-0 hash of password. (p. 390)
■ password -- Set password (ASCII-STR) (p. 389)
■ sha1 -- Enter SHA-1 hash of password. (p. 390)
■ password -- Set password (ASCII-STR) (p. 389)
■ [no] password all < all > -- Set or clear local password/username for a given access level (p. 389)
COMMAND DETAILS
user-name (p. 391)plaintext (p. 390)access (p. 388)
sha0 (p. 390)all (p. 389)
sha1 (p. 390)password (p. 389)
access
■ [no] password < operator | manager >
388© 2009 Hewlett-Packard Development Company, L.P.
