Filter
Top Products
Chapter 11. Logging
Name
Here, you give the log class a Name.
Log locally?
Select to save log messages to a local file on the Telecommuting Module. Locally saved logs can be searched on the
Display Log page. Yes will cause the log messages using this log class to be saved to file. No will cause the log
messages not to be saved on the Telecommuting Module and thus also not possible to search under Display Log.
Syslog
Syslog sends log messages to a syslog server. You enter the IP address of the syslog server on the Log Sending
page. Select Facility and Level for the syslog message. See your syslog server manual for more information on
facility and level. Selecting None for both Facility and Level turns the syslog alternative off. None must be selected
for both or none of Facility and Level. The Telecommuting Module will display a red warning text until both or
none of them are None.
Email address
The Telecommuting Module may also send the log messages by email to one or more email addresses. Enter the
addresses here (separated by comma). You must specify a mail server on the Log Sending page for the
Telecommuting Module to send the emails properly.
Delete Row
If you select this box, the row is deleted when you click on Add new rows or Save.
Create
Enter the number of new rows you want to add to the table, and then click on Create.
Save
Saves the Log Classes configuration to the preliminary configuration.
Cancel
Clears and resets all fields in new rows and resets changes in old rows.
Log Sending
In 3Com VCX IP Telecommuting Module, there are two ways of sending log messages automatically to somewhere
outside the box; to send to a syslog server and to send an email to an email address. If either method is used, the
Telecommuting Module must know where to send this. On this page, servers for log sending are configured.
110