Filter
Top Products
Chapter 1. Introduction to 3Com VCX IP Telecommuting Module
Fig 1. Telecommuting Module in DMZ configuration.
DMZ/LAN Configuration
Using this configuration, the Telecommuting Module is located on the DMZ of your firewall, and connected to it
with one of the interfaces. The other interface is connected to your internal network. The Telecommuting Module
can handle several networks on the internal interface even if they are hidden behind routers. No networks on other
interfaces on the firewall can be handled.
This configuration is used to enhance the data throughput, since the traffic only needs to pass your firewall once.
This configuration can only support one local network.
Fig 2. Telecommuting Module in DMZ/LAN configuration.
Standalone Configuration
Using this configuration, the Telecommuting Module is connected to your internal network on one interface and the
outside world on the other.
Use this configuration only if your firewall lacks a DMZ interface, or for some other reason cannot be configured
for the DMZ or DMZ/LAN alternatives.
Fig 3. Telecommuting Module in Standalone configuration.
Quick guide to 3Com VCX IP Telecommuting Module
installation
3Com VCX IP Telecommuting Module is easy to install:
2