Filter
Top Products
Chapter 3. Configuring 3Com VCX IP
Telecommuting Module
You connect to your 3Com VCX IP Telecommuting Module by entering its name or IP address in the Location box
of your web browser.
Logging on
Before you can configure the Telecommuting Module, you must enter your administrator username and password or
RADIUS username and password. The admin user is predefined with complete administration privileges.
Log on again
If you have a web connection for Telecommuting Module configuration that is inactive for more than 10 minutes,
you must enter the password again and click on one of the buttons Keep changes below and Abandon changes
below.
On all pages where changes have been made, the two buttons Keep changes below and Abandon changes below
will be shown when you log on again. Keep changes below connects you to the Telecommuting Module and stores
the preliminary configuration you have changed. Abandon changes below connects you to the Telecommuting
Module and discards the changes you have made on this page.
On pages where nothing has been changed, the Log in again button is displayed. Enter the password and click on
the button to re-connect to the Telecommuting Module.
The Telecommuting Module’s encryption key is changed every 24 hours. If you have a web connection for
Telecommuting Module configuration when this happens, you must enter the password again. This works in the
same way as when your connection has been inactive for more than 10 minutes (see above).
Log out
When you have finished looking at or adding settings, you should log out from the Telecommuting Module. Below
the menu there is a Log out button which will end your session.
13