Filter
Top Products
Chapter 10. Administration
Under Administration, you
• apply your configuration
• define administrator users and change their passwords
• save the preliminary configuration to file
• load a saved configuration
• view the configuration
• reboot your 3Com VCX IP Telecommuting Module
• restart the SIP module on your 3Com VCX IP Telecommuting Module
• upgrade your 3Com VCX IP Telecommuting Module
• set table formats
• set date, time, and time zone (manually or via NTP)
Save/Load Configuration
Here, you work with the preliminary and permanent configurations, save them and load new configurations from
previously saved configurations.
Test Preliminary Configuration
When Apply configuration is pressed, the Telecommuting Module will test the configuration before you make it
permanent.
During test, the Telecommuting Module waits for you to press one of the three buttons displayed. If you never see
the three buttons, something in your preliminary configuration (now tested) is wrong, which makes it impossible for
you to access the configuration web interface.
Duration of limited test mode
Here, you enter the time limit for the testing. If you do not press any button within this time, the Telecommuting
Module will assume that some part of your preliminary configuration makes connecting impossible. When the
timeout is reached, the Telecommuting Module automatically reverts to the old permanent configuration. If this
occurs, you will be informed when trying to press a button.
Apply configuration
Saves the preliminary configuration to the permanent configuration and puts it into use. You can test your
preliminary configuration before finalizing it.
Three buttons are displayed during the test:
87