Filter
Top Products
Chapter 4. How To Configure SIP
Here are the settings needed for this. It is assumed that the Telecommuting Module already has a network
configuration. Only the additional SIP settings are listed.
Basic
Go to the Basic page under SIP Services and turn the SIP module on. Here you also select log classes for SIP event
logging.
Interoperability
If Windows Messenger is used for SIP communication, you need to set a parameter on the Interoperability page.
Set lr=true status to On under Loose routing.
Routing
On the Routing page, you can enter the SIP server managing your SIP domain. Enter the name or IP address of the
SIP server under Outbound proxy.
If you enter the server name here, all SIP traffic from the inside will be directed to this server, regardless of where it
is bound to.
27