Filter
Top Products
Chapter 10. Administration
The Time zone field shows the current time zone setting. Change time zone by selecting one in the left-hand box
and press the Change time zone button.
Change Date and Time Manually
Here you change the Telecommuting Module clock manually. When you change time here, there will be a time gap
in the log files (if you change time forwards) or the same time will be shown twice (if you change time backwards).
N.B. Before you change time here, make sure that the Telecommuting Module uses the correct time zone above.
Date
The date is written as four digits for the year, two for the month and two for the day. The punctuation between year,
month and day must be dashes (-).
Time
Time is written as two digits for the hour, two digits for the minute and two digits for the second, although seconds
can be left out. The punctuation between hours, minutes and seconds must be colon (:) or period (.). A 24-hour
clock is used.
Set date and time manually
Click on Set date and time manually to change the clock in the Telecommuting Module to what you entered in the
Date and Time fields.
Change Date and Time With NTP
Instead of setting the time manually, you can let the Telecommuting Module get the correct time from an NTP
server. The time for synchronizing will be notably shorter if the Telecommuting Module time is approximately
correct when NTP is activated.
N.B. Before you change time here, make sure that the Telecommuting Module uses the correct time zone above.
95