Filter
Top Products
Chapter 6. Basic Configuration
Create
Enter the number of new rows you want to add to the table, and then click on Create.
SNMP v3
In SNMP version 3, the authentication is managed through the server sending a username and an (in most cases)
encrypted password to the Telecommuting Module, which verifies the validity of them.
Here, you select if the Telecommuting Module should accept access via v3, and select the authentication and
encryption used for the SNMP reuqests.
Access via SNMPv3
Select if access via SNMP version 3 (using usernames and encrypted passwords as the autentication method) should
be On or Off.
User
Enter a username which the server should use when contacting the Telecommuting Module.
Password
Press the Change password button to enter a password for this user.
Authentication
Select the authentication algorithm to use for SNMP requests. 3Com VCX IP Telecommuting Module supports the
MD5 and SHA-1 algorithms.
Privacy
Select whether the SNMP request should be encrypted using DES or not encrypted at all.
Delete Row
If you select this box, the row is deleted when you click on Add new rows, Save, or Look up all IP addresses
again.
Create
Enter the number of new rows you want to add to the table, and then click on Create.
SNMP Traps
If SNMP traps status is On, the Telecommuting Module will send messages (traps) to the server(s) entered below
whenever an SNMP authentication fails or the Telecommuting Module boots.
If the trap sending is disabled, no traps will be sent.
52