Filter
Top Products
Chapter 6. Basic Configuration
Contact person
Enter the name of the contact person for this 3Com VCX IP Telecommuting Module. This information is sent with
the parameter list as reply to an SNMP request from the server.
Node location
Enter the location of the Telecommuting Module. This information is sent with the parameter list as reply to an
SNMP request from the server.
The Telecommuting Module IP address to respond to SNMP requests
Enter the IP address of the Telecommuting Module to which the SNMP servers should direct their requests. Select
from the addresses defined on the Interface pages under Network.
Servers allowed to contact the Telecommuting Module via SNMP
Select the SNMP server(s) which are allowed to contact the Telecommuting Module. You select from the network
groups defined on the Networks and Computers page under Network.
SNMP v1 and v2c
In SNMP version 1 and 2c, the authentication is managed through an unencrypted password, a community. Here,
you select if the Telecommuting Module should accept access via v1 or v2c, and enter the valid communities.
Access via SNMPv1 and SNMPv2c
Select if access via SNMP version 1 or 2c (using communities as the autentication method) should be On or Off.
Community
Enter a password. Note that this password is stored unencrypted.
Delete Row
If you select this box, the row is deleted when you click on Add new rows, Save, or Look up all IP addresses
again.
51