A SERVICE OF

logo

3 - 7
CHK
ADJ
INSTALLING THE FUEL PUMP
1. Install:
fuel pump
NOTE:
Do not damage the installation surfaces of
the fuel tank when installing the fuel pump.
Always use a new fuel pump gasket.
Install the fuel pump as shown in the illustra-
tion.
Tighten the fuel pump bolts in stages in a
crisscross pattern and to the specified
torque.
FWD
T
R
.
.
4 Nm (0.4 m · kg)
INSTALLING THE FUEL HOSE
1. Install:
fuel hose
fuel hose holders
CAUTION:
When installing the fuel hose, make sure
that it is securely connected, and that the
fuel hose holders are in the correct posi-
tion, otherwise the fuel hose will not be
properly installed.
INSTALLING THE T-BAR
1. Install:
T-bar
CAUTION:
Always tighten the T-bar mounting bolts to
the specified torque.
T
R
.
.
78 Nm (7.8 m · kg)
SEATS AND FUEL TANK