4 - 68
CHAS
FRONT FORK
6. Install:
• oil seal clip 1
NOTE:
@
Adjust the oil seal clip so that it fits into the
groove of the outer tube.
7. Install:
• dust seal 1
(with the fork seal driver)
New
8. Fully compress the front fork leg.
9. Fill:
• front fork leg
(with the specified amount of the recom-
mended fork oil)
CAUTION:
@
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
• When disassembling and assembling the
front fork leg, do not allow any foreign
material to enter the front fork.
Quantity (each front fork leg)
0.7 L
Recommended oil
Suspension oil “01” or equiva-
lent
10.After filling the front fork leg, slowly stroke
the damper rod 1 up and down (at least ten
times) to distribute the fork oil.
NOTE:
@
Be sure to stroke the damper rod slowly
because the fork oil may spurt out.
