A SERVICE OF

logo

8 - 24
–+
ELEC
STARTER MOTOR
EAS00770
CHECKING THE STARTER MOTOR
1. Check:
commutator
Dirt
Clean with 600 grit sandpaper.
2. Measure:
commutator diameter
a
Out of specification
Replace the starter
motor.
Commutator wear limit
23.5 mm
3. Measure:
mica undercut
a
Out of specification
Scrape the mica to
the proper measurement with a hacksaw
blade that has been grounded to fit the
commutator.
NOTE:
@
The mica of the commutator must be undercut
to ensure proper operation of the commutator.
Mica undercut
1.5 mm