A SERVICE OF

logo

4 - 17
CHAS
FRONT AND REAR BRAKES
5. Install:
brake pad pins
brake pad clips
brake caliper
brake hose holder
T
R
.
.
40 Nm (4.0 m · kg)
T
R
.
.
7 Nm (0.7 m · kg)
6. Check:
brake fluid level
Below the minimum level mark a Add
the recommended brake fluid to the proper
level.
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in chapter 3.
7. Check:
brake lever operation
Soft or spongy feeling Bleed the brake
system.
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM” in chapter 3.
EAS00583
REPLACING THE REAR BRAKE PADS
NOTE:
@
When replacing the brake pads, it is not neces-
sary to disconnect the brake hose or disas-
semble the brake caliper.
1. Remove:
retaining bolts 1
brake caliper 2
2. Remove:
brake pads 1
(along with the brake pad shims)
brake pad springs 2