A SERVICE OF

logo

5 - 89
ENG
2. Apply:
sealant
(onto the crankcase mating surfaces)
NOTE:
@
Do not allow any sealant to come into contact
with the oil gallery or crankshaft journal bear-
ings. Do not apply sealant to within 2 ~ 3 mm
of the crankshaft journal bearings.
3. Install:
dowel pins
Yamaha bond No. 1215
90890-85505
4. Set the shift drum assembly and transmis-
sion gears in the neutral position.
5. Install:
lower crankcase 1
(onto the upper crankcase 2)
CAUTION:
@
Before tightening the crankcase bolts,
make sure the transmission gears shift cor-
rectly when the shift drum assembly is
turned by hand.
CRANKCASE