A SERVICE OF

logo

4 - 30
CHAS
FRONT AND REAR BRAKES
5. Check:
brake fluid level
Below the minimum level mark a Add
the recommended brake fluid to the proper
level.
Refer to “CHECKING THE BRAKE FLUID
LEVEL” in chapter 3.
6. Check:
brake lever operation
Soft or spongy feeling Bleed the brake
system.
Refer to “BLEEDING THE HYDRAULIC
BRAKE SYSTEM” in chapter 3.
EAS00608
ASSEMBLING THE REAR BRAKE MASTER
CYLINDER
1. Install:
copper washers 1
brake hose 2
union bolt 3
WARNING
@
Proper brake hose routing is essential to
insure safe motorcycle operation. Refer to
“CABLE ROUTING”.
CAUTION:
@
When installing the brake hose onto the
brake master cylinder, make sure the brake
pipe touches the projection
a
as shown.
New
T
R
.
.
30 Nm (3.0 m · kg)
2. Fill:
brake fluid reservoir
(with the specified amount of the recom-
mended brake fluid)
Recommended brake fluid
DOT 4